Make metals shine brighter with BP CLEANER Alkaline Carbon and Rust Remover, a potent blend of alkaline detergents and penetrating agents that removes grease, paint, rust and carbon while simultaneously providing a thin, protective film. BP CLEANER contains corrosion inhibitors to prevent flash rusting of metal parts after cleaning. The convenient liquid form eliminates mixing and caking problems associated with powders and reduces clean-up time.
|Solubility (in water)||Soluble|
|Solubility (in mineral spirits)||Insoluble|
|Viscosity (CPS at 70oF)||>40|
|Flash Point (ASTM D-7821)||None|
|Specific Gravity||12.51 ± 0.05 lbs/gal|
|Density||1.50 ± 0.05 g/cm3|
|Storage Stability (at 70oF)||1 year|
|Ingredients C.A.S #|
BP CLEANER should be added slowly to water in the soak tank. Dilutions may vary according to the amount of deposits and speed of removal required. One part BP CLEANER in three to five parts of water will provide satisfactory results at temperatures of 160oF, or higher where there is agitation of the hot cleaning solution.
|Drain Opener||Apply full strength|
|Smokehouse Cleaner||Use at a 1 to 20 dilution|
|Concrete Cleaner||Use at a 1 to 5 dilution|
|Rust Proof Remover||Use at a 1 to 5 dilution|
|Epoxy Remover||Use at a 1 to 5 dilution|
|Chimney Cleaner||Use at a 1 to 10 dilution|
|Grill and Fryer Cleaner||Use at a 1 to 12 dilution|
|Personal Protection||X||Minimal||0||Insignificant||Special Percautions||None|
Copyright 2011 © Okel Research Laboratories. All Right Reserved.